How to Apply

1Step
Place the Wand Tip on the Beauty Wand.
2Step
Keep the Beauty Wand flat to the skin with rollers lightly touching the skin at all times.
3Step
Slowly glide the Beauty Wand back and forth on long, deliberate strokes.

Using continuous strokes. Finish one section of your face before moving on to the next.

When to Apply

Cleanse
Treat
Moisturize
SPF
Before Opté
Powder & Color Costmetics
After Opté

Tips & Tricks

Tutorial

Tips & Tricks

Application Techniques

Slow
The slower you move, the better the results.
Sweep
Use long, continuous sweeping strokes up and down the face. Don’t remove the Wand from your skin between strokes.
Soft
Use gentle pressure. If you see your skin move or have any indentations from the rollers, you are pushing too hard.
Straight
Hold the Beauty Wand flat with both rollers touching the skin. Tilting the rollers reduces effectiveness.
Sequence
Complete multiple passes to build up more coverage. Allow the Serum to dry for a few seconds between passes.

Advice from Users

Silvia L.

Lisa E.

GETTING STARTED

STEP 1

After plugged in cradle AUTO-UNLOCKS. Manually lift lid.

STEP 2

Lift off Tip Tray.

STEP 3

Open Refill Kit and remove Preserving Disk.

STEP 4

Insert Preserving Disk.

STEP 5

Replace Tip Tray.

STEP 6

Flip Beauty Wand so that the back is facing up.

STEP 7

Slide the back down to open.

STEP 8

Remove Tone Perfecting Pod from Refill Kit and slide Tone Perfecting Pod from packaging ring.

STEP 9

Insert Tone Perfecting Pod into Beauty Wand arrow side up.

STEP 10

Slide the Beauty Wand shut.

What’s Included

Starter Kit

  • Beauty Wand
  • 2 Wand Tips
  • Cradle
  • Power Cord

Refill Kit

  • Tone Perfecting Serum
  • Preserving Disk

System Care

Maintenance for your system is simple and requires little effort or time.

Replacing Serum & Preserving Disk

The Serum and the Presurving Disk need to be replaced when you see the red drop. See instructions in Refill Kit for how to complete the refill process.
1
Step
  • Remove Tip Tray.
  • Replace Preserving Disk.
  • Replace Tip Tray.
2
Step
  • Flip Wand over and slide the back down.
  • Replace Serum (arrow side up)
  • Slide the back closed.

Cleaning Wand Tips

Step 1

Remove tip from Beauty Wand

Step 2

Wash gently with soap and water

Step 3

Dry completely with a paper towel before use

Trouble Shooting

  • The Cradle froze. Pressing the button does not do anything.
    Unplug the Cradle for 30 seconds. Plug in the Cradle and wait an additional 30 seconds before requesting the Wand.
  • The Wand shut off during use.
    Return the Wand to the Cradle. Wait for the Wand to power up (it will make a noise). Close the Cradle lid and wait 30 seconds before requesting the Wand. If the Wand shuts off again, the battery is low and the Wand needs to remain in the Cradle for longer to charge.
  • The Cradle lid popped open and is displaying an error code.
    Remove the Wand from the Cradle. Remove the Preserving Disk. Unplug the Cradle and wait 30 seconds. Plug in the Cradle. Insert the Preserving Disk. Insert the Wand. Close the Cradle lid.
  • All 3 indicator lights on the Wand are red and flashing.
    Slide open the back cover of the Wand and remove the Tone Perfecting Serum. Insert the Tone Perfecting Serum and slide the back cover shut.
  • The Cradle lid popped open and the Wand is rotated on its side.
    This is common. Close the Cradle lid and use the Wand as you normally would